热门站点| 世界资料网 | 专利资料网 | 世界资料网论坛
收藏本站| 设为首页| 首页

MIL-C-53072A

作者:标准资料网 时间:2024-05-11 01:22:34  浏览:8138   来源:标准资料网
下载地址: 点击此处下载
MIL-C-53072A, MILITARY SPECIFICATION: CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION (15 MAR 1988) [S/S BY MIL-DTL-53072C]., This document covers the general requirements for application and inspection of the t resistant coating (CARC) system used on tactical military equipment. It is intended for use as a guide in selection of the appropriate materials and procedures, and as a supplement to information available in the below referenced cleaning, pretreating, and coating specifications. The document also includes information on touchup/repair, health and safety guidelines, environmental restrictions, national stock numbers (NSN) for CARC and CARC-related materials, and application equipment and techniques.
下载地址: 点击此处下载
基本信息
标准名称:油淬火-回火弹簧钢丝用热扎盘条
英文名称:Hot—rolled wire rod for quenched and tempered springs
中标分类: 冶金 >> 钢铁产品 >> 型钢、异型钢
ICS分类: 冶金 >> 钢铁产品 >> 钢棒和钢条
替代情况:调整为YB/T 5365-2006
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2004-06-09
实施日期:2004-12-01
首发日期:2004-06-09
作废日期:2007-09-29
主管部门:中国钢铁工业协会
归口单位:全国钢标准化技术委员会
起草单位:江苏沙钢集团有限公司
出版社:中国标准出版社
出版日期:2004-09-09
页数:16开, 页数:12, 字数:17千字
书号:155066.1-21606
适用范围

本标准规定了油淬火—回火弹簧钢丝用无扭控冷热轧盘条的牌号、订货内容、尺寸、外形、重量及允许偏差、试验方法、检验规则、包装、标志和质量证明书。本标准适用于冷拔和(或)冷轧后进行油淬火—回火弹簧钢丝用热轧盘条。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 钢铁产品 型钢 异型钢 冶金 钢铁产品 钢棒和钢条
Product Code:SAE AMS6412
Title:Steel, Bars and Forgings, 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.

版权声明:所有资料均为作者提供或网友推荐收集整理而来,仅供爱好者学习和研究使用,版权归原作者所有。
如本站内容有侵犯您的合法权益,请和我们取得联系,我们将立即改正或删除。
京ICP备14017250号-1